Typical application: X-DUTY CLEANER is suitable for a wide variety of applications, including: building facades, floors, walls, swimming pool surrounds, patios, garages, kitchens and public and private entertaining areas.

Benefits: X-DUTY CLEANER is able to clean graffiti, grout haze and stains from surfaces; suitable for indoor and outdoor use, and easy to use with a low odor.

Application rates: Typical application rate is approximately 20 ml per 100 x 100 mm surface mark (a cap full per 4 x 4 in. mark), depending on surface absorption and type of stain.

How to use:
1. ALWAYS TEST PRODUCT ON A SMALL AREA FIRST. Allow a 24-hour cure time. Check that the sealer does not discolor the surface.
2. Sweep surface to remove dust and dirt.
3. Use product undiluted directly from the container.
4. Apply solution to the surface using a clean white cloth and allow 60 seconds for penetration before lightly scrubbing using a natural bristled brush.
5. Wipe off excess using a clean white cloth to remove residue.
6. For stubborn deep-seated stains wet the surface with X-Duty Cleaner for two minutes and repeat steps three to 5.
7 Clean equipment with methylated spirits.

Precautions: Do not take internally. Apply when surface temperature is between 5 - 35ºC (40 - 95ºF). Protect surrounding areas from over-spray. Keep away from drains, plants, water and soil. Use only in well-ventilated areas. Wear suitable gloves, protective clothing and safety goggles during application. Avoid applying in windy conditions. Wash hands thoroughly.

Active content: A mixture of 50 per cent active content in pyrrolidone mixture.
Pack size: North America one quart, Elsewhere 1 liter container.

Storage: Use product within 12 months of purchase. Keep container tightly sealed, in a cool well-ventilated place. Product is freeze-thaw stable.